The new weekly challenge over at Sunny Challenges & Creations starts today. It is an easy one this week, although it did set my mind racing as there are sooooooooo many ways you could create your project by creating a Window in your card! Yep, Kris has set us a challenge by making a “window in our card“.
I will admit, I based my card around 2 pieces of paper – one being the DSP & the other Soft Suede Cardstock. I found these 2 pieces already adhered together in with the DSP pack. Obviously, I had used the remainder of the strip for something else & the piece left was just perfect for a card folded on it’s side. The piece of Soft Suede Cardstock had even been punched with the Scallop Edge Border Punch, so that was an added bonus as far as I was concerned.
I even used a piece of Textured Cardstock for my Base Card which I found in my Textured Drawer of cardstock. I thought it would take away the blank look of the front of the card while at the same time, giving it a suttle soft feel to the card…….. I wanted the window to be my focus.
Then in the middle of creating my card, the “light bulb” went off & I created the window around a tiny stamp, but all will be revealed as we get further down…….. curious now!!!!!!!!!!!!
Stamp Set – Elementary Elegance, Elements of Style, Sincere Salutations, En Francais
Ink – Soft Suede, Pink Pirouette
Cardstock – Pink Pirouette Textured, Very Vanilla, Soft Suede
DSP – Beau Chateau
Punches – Scallop Edge Border, 1 3/4″ Circle, 2 3/8 Scallop Circle
Ribbon – 1/2 Seam Binding – Very Vanilla
Accessories – Tombow Multipurpose Glue, Dotto, Pearls, Snail Adhesive
Base Card – Pink Pirouette Textured Cardstock – 12″ x 4 1/8″ or 30cm x 10.5cm – Scored in the middle longways & folded in half
Layer 1 – DSP – 1″ x 4 1/8″ or 2.5cm x 10.5cm
Layer 2 – Soft Suede – 1″ x 4 1/8″ or 1.5cm
Once the card had been scored & folded in half, I cut about 1 1/4″ of Cardstock from the front right hand side of the card – the top layer ONLY!!!!!!
Prior to adding my bits down the Right Hand Side of my card, I punched a circle from the front top layer of my card using the 1 3/4″ Circle Punch. I adhered the piece of DSP & Soft Suede Cardstock down the RHS with Snail Adhesive. I allowed about 1/8″ from the edge of the card showing on the RHS.
|My little WOW factor with the little stamped bird inside the card|
I punched a circle out of the DSP using the 1 3/4″ Circle Punch, positioned the 2 3/8″ Scallop Circle Punch over the top, ensuring that the DSP was even on all side prior to punching. Don’t you just love how all SU! punches gel together?????? You should have a scalloped circle ready to be placed over the the window in your card.
I cut a piece of Very Vanilla Cardstock for the inside of my card – 4″ x 5 5/8″ & adhered with Snail Adhesive. A circle was punched from a scrap piece of paper with my 1 3/4″ Circle Punch & placed over the top of the inside layer ensuring that the whole of the Very Vanilla was covered with the scrap paper. I placed a temporary adhesive to the back of the paper with Dotto so that the paper wouldn’t move around when I stamped.
I inked my script image with Pink Pirouette Ink, stamped over the paper & onto the Very Vanilla Cardstock. The excess ink went straight onto the scrap paper. When I removed the scrap paper, I had a round circle of script on the Very Vanilla Cardstock inside. This script image appeared through the window when the card was closed.
TIP – To remove any little bits of Dotto on your card, rub gently with Adhesive Remover
|See the little wings behind the big bird…..|
I adhered my scalloped DSP circle over the top of the window with Tombow, stamped my bird image onto a scrap of Very Vanilla using Soft Suede Ink, cut out & WHAM – the “light bulb” switched on!!!!!! I adhered the cut out bird to the top of the DSP scallop circle by his little wing tip with Tombow. The bird was covering the little bird on the inside & cannot be seen until you open the card…..
As the card was still missing something I tied a knot with Very Vanilla Seam Binding & adhered to the DSP with a Mini Glue Dot.
I decided to stop there, but after putting all my “stuff” away, I eyed my Pearls & thought “why not” – so on with the Pearls down the Scallop Edge Border & of course, 1 for his little eye.
I grabbed a greeting & stamped direct onto the Textured Cardstock with Soft Suede. It just seemed to balance the card a bit better.
This is the card I created fo rthe new challenge over at Stamping 411. As soon as I saw this sketch, I knew what I wanted to use & how it should look when I finished. I wanted to try & create a shabby chic/vintage type card. I think I have succeeded in getting the results I had in my head.
As usual the operators have provided us with all the basic measurements – all the hard work has been done for us –
Base: 8 1/2″ x 5 1/2″, scored and folded in half at 4 1/4″ – Very Vanilla
Layer 2: 4 x 5 1/4″ – Soft Suede
Layer 3: 4″ x 1 1/2″ – DSP
Layer 4: 2 1/2″ x 2 1/4″ – DSP
Layer 5: 2 3/8″ x 2 1/8″ – Very Vanilla
I Heat Embossed my image onto the piece of Soft Suede using Versamark & Clear Embossing Powder.
|Envelope & Inside Card…|
I adhered the DSP to a piece of Pink Pirouette so that I didn’t have the DSP straight onto the Soft Suede & to break the colours up a little. I think it looks pretty with the little bit of Pink Pirouette showing as a small edge. I then adhered this piece to the embossed piece using Snail Adhesive.
The Ribbon was adhered across the top part of the DSP & ends tucked under. The whole piece was then adhered to the Base Card – Very Vanilla using Snail Adhesive.
Stamping the image onto the small piece using Versamark & Soft Suede Inks, I Heat Embossed it. Using my Aqua Painter, I gently coloured the images with Pink Pirouette & Wild Wasabi Inks. I nearly left the leaves clear, but after looking at it for a little time, decided to go ahead & colour them. I like the little bit of green in the card!
|Close Up of Clear Embossing & Flowers…|
I applied Pearls to the centres of some of the flowers & adhered both pieces to the card as per the sketch. I found a couple of small Butterflies that were in my packet of Pink Pirouette already cut out, so I used them on the card. The large Butterfly was adhered with Multipurpose Glue & 2 small Pearls applied to the centre. The Butterflies had been cut using the Beatuiful Wings Embosslits Dies.
I stamped my sentiment direct onto a piece of Very Vanilla using my SU Marker – Soft Suede, punched with the Modern Label Punch, dabbed a little Pink Pirouette around the edges, adhered to the card with Stampin’ Dimensionals & adhered the small butterfly to the sentiment. I applied 3 small Pearls to the punched piece – 1 in the centre of the Butterfly & 2 to replace the “o” in the words.
Lastly, I tied a bow & applied to the card with Mini Glue Dots.
When I saw this sketch, it is very similar to a scrapbook layout I have completed for a class I have this month, which I will post once the class is finished.
Again, I’ve taken Dannielle & Chris as the focus & all I’ve done is flip the page 90 deg & added a bit of a heading.
It is merely the same as the posting here.
For my heading, I printed onto Whisper White Cardstock, punched with the Decorative Label Punch & then again in Night of Navy. This piece I cut in half lengthways & adhered to the top & bottom prior to adhering to page.
Stamp Set – Elements of Style
Ink – Night of Navy
Cardstock – Soft Suede – Textured, Night of Navy, Whisper White
DSP – Beau Chateau
Punches – Decorative Label
Ribbon – 1/2″ Seam Binding – Baja Breeze, 3/8″ Raffeta – Night of Navy
Accessories – Flowers, Rhinestones, Snail Adhesive, SU Dimensionals
This week for the new challenge over at Sunny Challenges & Creations I decided to go another way. Mind you, this wasn’t until I had all my stuff to create my card sitting on the desk. After desicovering that the DSP – Beau Chhateau goes with the Stamp Set Elements of Style & wanting to use both, I then did a complete switch & scrapped a page for my album.
The page is from Dannille’s mum’s wedding recently held in October where both her & Amber were bridesmaids. The photos are so beautiful that it just seemed a shame not to do something with them. This one is of Dannielle & her fiancé, Chris.
Once I had decided to go with the colours Chris was wearing, I again grabbed the DSP – Beau Chateau & the matching stamp set Elements of Style to complete my page.
|Rhinestones & Stamped Image…|
Prior to adhering the Night of Navy Cardstock to the DSP, I adhered a piece of Seam Binding Ribbon across the centre & then a piece of Taffeta Ribbon over the top.
I layered 3 different size Flowers together, placed a Brad in the centre of each & adhered them to the LHS of the photo with SU Dimensionals.
|Rhinestones & Flowers…|
I am really happy with this page, as it is not too fussy or over the top, just like the beautiful dress she is wearing, while catching the colours in Chris’ clothes.