Tree Trimmings – Page 2

Xmas ….

Published on November 3, 2011June 9, 2014 by Vicky Wright2 Comments

I created this card sometime ago & have never gotten around to posting it. I did get the idea from the very talented Holly Krautkremer a long time ago. I didn’t save the card but stored it in my head for all this time. I don’t even know if Holly created it for this Christmas or for last Christmas. I am not even sure if it is exact copy, but I think it is close enough. I only hope I have done it justice Holly!

Measurements –

Base Card – Rich Razzleberry – 8 1/4″ x 5 7/8″ or 21cm x 15cm – scored & folde in half landscape
Layer 1 – Old Olive – 5 3/4″ x 4″ or 14,5cm x 10cm
Layer 2 – Rich Razzleberry – 3″ x 3 3/8″ or 7.5cm x 8.5cm
Layer 3 – Whisper White – 2 7/8″ x 3 1/4″ or 7cm x 8cm

I run the piece of Old Olive through the Bigshot using the Petals a Plenty Embossing Folder. I adhered a piece of Satin Ribbon off-centre across the card & tied a double bow tie to the RHS.

I stamped the piece of Whisper White Cardstock with the small snow flake from Short & Sweet Stamp Set using both Rich Razzleberry & Old Olive Inks. I stamped 3 images onto scraps of Whisper White Cardstock, 2 in Old Olive & 1 in Rich Razzleberry. I cut these images & adhered over the top of Rich Razzleberry Ribbon using SU Dimensionals. The ribbon had been adhered to the Whisper White Cardstock. I applied 3 Basic Pearls to the top of the images.

I adhered the Whisper White piece to the piece of Rich Razzleberry Cardstock & then adhered to the Old Olive using SU Dimensionals. I adhered 3 Basic Pearls to the card.

A very quick, but very elegant Xmas card.

Supplies –

Stamp Set – Short & Sweet, Tree Trimmings

Ink – Rich Razzleberry, Old Olive

Cardstock – Old Olive, Rich Razzleberry, Whisper White

Embossing Folder – Petals a Plenty

Ribbon – 3/8″ Taffeta – Rich Razzleberry, 5/8″ Satin – Rich Razzleberry (Retired)

Accessories – Snail Adhesive, SU Dimensionals, Basic Pearls, Bigshot

Until next time, Enjoy!

Very Merry…

Published on October 21, 2011June 9, 2014 by Vicky Wright2 Comments

Another Xmas card you ask???? Well, it is getting close to that time of the year & me being me, I like to have my cards in the mail the first week in December.
???????????

Inside…

The layout for this card has been around the blog world for some time, so I have to say it is not my idea, but a combination of many cards & layouts I’ve seen over time. I love both stamp sets I’ve used on this card, so very versatile without being over the top.

Again, I’ve created a non-traditional card. Gotta love non-tradition…..

Base Card – Early Expresso – 8 1/4″ x 4 1/4″ or 21cm x 10.5cm – Scored & folded in half longways

Layer 1 – Blushing Bride – 5 3/4 x 4″ or 14.5cm x 10cm

Layer 2 – Whisper White – 5 5/8″ x 3 7/8″ or 14cm x 9.5cm

Layer 3 – DSP – 5 1/2″ x 3 3/4″ or 13.5cm x 9cm

Layer 4 – Early Exresso – 3 1/4″ x 2 1/4″ or 8cm x 5.5cm

Layer 5 – Whisper White – 3 1/8″ x 2 1/8″ or 7.5cm x 5cm

I cut my DSP into 3 pieces, being careful that I didn’t mix the sections so that I knew which order they would be adhered to the card. I actually didn’t want them all to be the same size, but the 1st & 2nd are…..

These pieces were adhered to Whisper White leaving a small border of Whisper White around each piece, then to Blushing Bride using Snail Ahesive.

Envelope…

?I stamped 3 images onto the smaller piece of Whisper White using Old Olive & Blushing Bride Inks. I drew the lines at the top of the images with my SU Markers – Old Olive & Blushing Bride. I adhered this piece to the top of the DSP with Snail Adhesive.

I stamped my greeting onto Whisper White scrap piece with Early Expresso Ink, punched it out with my Small Oval Punch & adhered to a piece of Early Expresso which had been punched using Large Oval Punch.

I punched a hole in either side of the ovals, run ribbon through them & across the card, tucked my ends under & adhered the whole piece to the Base Card – Early Expresso.

To pop the card a little, I applied Basic Rhinestones to the images & to the ribbon at the greeting.

Supplies –

Stamp Set – Short & Sweet, Tree Trimmings

Ink – Early Expresso, Blushing Bride, Old Olive

Cardstock – Whisper White, Early Expresso, Blushing Bride

DSP – Letters to Santa

Punches – Small Oval, Large Oval

Ribbon – 1/8″ Taffeta – Early Expresso

Accessories – Snail Adhesive, Basic Rhinestones, SU Markers

Until next time, Enjoy!

Xmas…

Published on October 7, 2011June 9, 2014 by Vicky Wright2 Comments

This is the card we made today at Crafty Creations. All the ladies loved it & of course, the best part – even though we all had the same basic kit, everyone’s card turned out so very different!

Base Card – Old Olive – 8 1/2″ x 5 7/8″ or 22cm x 15cm

Front –

Layer 1 – Blushing Bride – 5 3/4″ x 2 1/8″ or 14.5cm x 5.5cm

Layer 2 – DSP – 5 5/8″ x 2 3/4″ or 14cm x 5cm

Layer 3 – Old Olive – 3 1/2″ x 2″ or 8.5cm x 5cm

Layer 4 – Whisper White – 3 3/8″ x 1 7/8″ or 8cm x 4.5cm

LHS –

Layer 1 – Whisper White – 5 3/4″ x 2 1/8″ or 14.5cm x 5.5cm

RHS –

Layer 1 – Early Expresso – 5 3/4″ x 4″ or 14.5cm x 10cm

Layer 2 – DSP – 5 5/8″ x 3 7/8″ or 14cm x 9.5cm

Score along long edge of card at 2 1/4″ & 4 1/4″. Fold at score lines.

????????

Inside Card…

???????????????

Front –

Using Snail Adhesive, I adhered DSP to Blushing Bride Cardstock, then to the Base Card – Old Olive. I stamped random snowflake images onto Whisper White Cardstock using Early Expresso & Blushing Bride Inks. I stamped the image to be cut out onto a scrap of Whisper White Cardstock using Old Olive Ink. This was adhered to the piece of Whisper White Cardstock using SU Dimensionals. I drew a line from the top of the card to the image with my SU Marker – Old Olive.

I adhered this piece to the Old Olive piece & then to the front of the card, ensuring that adhesive was only applied to half the piece. I applied a Basic Pearl to the top of the trim.

Inside LHS –

I randomly stamped snowflake images onto a piece of Whisper White Cardstock using Blushing Bride & Early Expresso Inks. With the Early Expresso images, I stamped off once prior to stamping onto the Whisper White, as I didn’t want this colour to be too dark. I then stamped a trim onto the Whisper White using Blushing Bride & drew a line from the top of the card to the top of the trim with my SU Marker – Old Olive.

I adhered this piece to the Base Card – Old Olive, as per photo.

Inside RHS –

I adhered the DSP to Early Expresso Cardstock & then to the Base Card – Old Olive.

Supplies –

Stamp Set – Tree Trimmings, Short & Sweet

Ink – Blushing Bride, Old Olive, Early Expresso

Cardstock – Old Olive, Blushing Bride, Early Expresso, Whisper White

DSP – Letters to Santa

Accessories – SU Markers – Old Olive, Snail Adhesive, SU Dimensionals, Basic Pearl

Until next time, have a great night!

Dasher…

Published on October 4, 2011June 9, 2014 by Vicky Wright3 Comments

I did these couple of cards a little time ago, but hadn’t gotten round to posting. They are both the same with a couple of little differences, plus I used a colour that to me has gone a little by the wayside with all the new colours SU have!

Card 1 –
Base Card – Chocolate Chip – 9 1/4″ x 4 1/4″ or 23.5cm x 10.5cm – scored & folded at 3 1/2″ or 9cm
Layer 1 – Bashful Blue – 5 5/8″ x 4″ or 14cm x 10cm
Layer 2 – Whisper White – 5 1/2″ x 3 7/8″ or 13.5cm x 9.5cm
Layer 3 – Bashful Blue – 3 3/8″ x 4″ or 8.5cm x 9cm
Layer 4 – Chocolate Chip – 2 3/4″ x 2″ or 7cm x 5cm
Layer 4 – Whisper White – 2 5/8″ x 1 7/8″ or 6.5cm x 4.5cm
?

Card 1 – Inside…

?
I stamped my image direct onto piece of Whisper White Cardstock using Chocolate Chip Ink, adhered this piece to the Chocolate Chip Cardstock & set aside.

With Embossing Folder – Elegant Lines, I run the piece of Bashful Blue through the Bigshot, tied a knot in the middle of the ribbon before adhering to the LHS of the embossed piece. This was adhered to the front of the card.

I then adhered the stamped piece to the top of the card, ensuring I placed adhesive on ONLY half of the piece to be adhered to the card. Basic Rhinestones were applied to the image.

Inside –
I stamped the image direct onto Whisper White using Chocolate Chip Ink, adhered to Bashful Blue & then to the Base Card – Chocolate Chip.

Card 2 –
Base Card – Chocolate Chip – 9 1/4″ x 4 1/4″ or 23.5cm x 10.5cm – scored & folded at 3 1/2″ or 9cm

Layer 1 – Bashful Blue – 5 5/8″ x 4″ or 14cm x 10cm
Layer 2 – Whisper White – 5 1/2″ x 3 7/8″ or 13.5cm x 9.5cm
Layer 3 – Bashful Blue – 3 3/8″ x 4″ or 8.5cm x 9cm
Layer 4 – Chocolate Chip – 3″ x 2 1/2″ or 7.5cm x 6.5cm
Layer 4 – Whisper White – 2 7/8″ x 2 3/8″ or 7cmx 6cm

Inside –

I used a Technique – “Bubble Background”. I had watched this great video from Frenchie quiet some time ago & had always remembered it. While creating this card, I thought it would be the perfect opportunity to put this technique to the test. It creates a very soft suttle background. One, which I was aimng for, as I still wanted to be able to write over the top for my message. ????

Once my background had been created onto Whisper White, I stamped 2 images using Bashful Blue & Chocolate Chip Inks. I then randomly stamped the Snowflake images around the outside of the card using Bashful Blue Ink.

Front –

Using Bashful Blue Ink, I randomly stamped the piece of Bashful Blue Cardstock, tied a knot in the piece of ribbon, adhered to the LHS & adhered to the base card – Chocolate Chip Cardstock.

I stamped the images onto Whisper White using Chocolate Chip & Bashful Blue Inks & adhered to the piece of Chocolate Chip Cardstock. This piece was adhered to the front of the card, ensuring adhesive was applied to ONLY half of the piece to be adhered to the card.

All in all 2 very quick Christmas Cards. These would be great for a Stamp-a-Stack & could be applied for any occasion.

Supplies –

Stamp Set – Dasher, Trim Trimmings, Short & Sweet

Ink – Bashful Blue, Chocolate Chip

Cardstock – Whisper White, Bashful Blue, Chocolate Chip

Ribbon – 1/2″ Scallop Dots – Chocolate Chip, 5/8″ Grosgrain – Chocolate Chip (Retired)

Embossing Folder – Elegant Lines

Accessories – Re-Inker – Chocolate Chip, Snail Adhesive, Basic Rhinestones, Bigshot

Non-SU – Plastic Dish, Drinking Straw

Until next time, Enjoy!

Starting Out…

Published on September 15, 2011June 9, 2014 by Vicky Wright1 Comment

…as a gift card turning into a Christmas Card but with a small difference….

I had scraps of coloured cardstock sitting on my desk after completing a couple of other projects & instead of putting it all away, I thought I would attempt to make a small gift card. Once I finished it & as I have to create a “Master Plan” for tomorrow’s class, I took it one step further & created a Christmas Card.

I used Retired DSP on this card, but it can be quickly turned into a completely different card using the DSP – Letters From Santa which is the current Xmas Paper or any DSP for that matter!

Base Card – Cherry Cobbler – 5 7/8″ x 4 1/4″ or 15cm x 10.5cm
Layer 1 – DSP – 5 3/4″ x 4″ or 14cm x 10cm
Layer 2 – Cherry Cobler – 5″ x 3 5/8″ or 12.5cm x 9.5cm – Scored in half
Layer 3 – Old Olive – 4 7/8″ x 3 1/2″ or 12cm x 9cm
Layer 4 – Very Vanilla – 4 3/4″ x 3 3/8″ or 11.5cm x 8.5cm

Using my SU Marker – Chocolate Chip, I drew squiggley lines around the edge of the Very Vanilla Cardstock. I stamped my 2 images using Cherry Cobbler & Old Olive Inks direct onto Very Vanilla Cardstock. I drew 2 lines from the images to the border around the card using my SU Markers – Chocolate Chip.

This piece was adhered to Olid Olive Cardstock & then to the Cherry Cobbler Cardstock. Using 2-Way Glue, I randomly applied this to the stamped images & applied Dazzling Diamonds – cannot be seen very well in the photo. This was my original gift card.

I adhered a piece of Very Vanilla Grosgrain Ribbon to the lower half of the DSP, tied a knot & then adhered to the Base Card – Cherry Cobbler. The Gift Card was then adhered to the LHS of the Base Card – as per photo.

I stamped the sentiment using Chocolate Chip Ink onto Very Vanilla, punched using my Oval Punch & adhered to a piece of Cherry Cobbler Cardstock which had been punched using the Scallop Oval Punch. I adhered this to the Base Card.